Designed for use with TANK-LESS Reverse Osmosis Systems:
You will need this booster pump if the input water pressure to your Reverse Osmosis System is lower then 50 PSI, the PPM count of the water is very high (turbid Water) or if you have a combination of both.
This pump does not automatically shut off.
Plug-In when you wish to make water and simply unplug when finished. This is ideal for those Aquarium enthusiasts who fill large barrels of water for the purpose of conducting water changes. You can however have the booster pump controlled by a timer. You can find the timer on the parts and accessories page.
This booster pump system Raises the water pressure (PSI)in your reverse osmosis system and maintains the pressure at ideal levels for the system to operate at maximum efficiency.
• Make 100 GPD by Increasing water pressure between 70-100 PSI
• Easy Installation
• Self Priming
• Mounting Bracket with rubber absorbers
• Whisper Quite during operation
• 1/4" Quick connect Fittings
This booster pump will ensure consistent production of the high quality R.O. water you desire.
The compact Design of this Booster Pump with its minimal connections allows for easy installation wherever your Aquasafe Reverse Osmosis System may be situated.
This Booster Pump Is designed for use with Reverse Osmosis Water Purification Systems. Check the specifications carefully before applying this booster pump for other uses.
The following is included with a purchase of this Booster Pump
1 x 100 PSI Booster Pump
1 x 24V Transformer (Mountable)
2 x Quick Connect Elbows Fittings (3/8" - 1/4" adaption)
1 x Pre assembled booster pump mounting bracket
Booster Pump Specifications:
• Nominal Flow Rate: 1.0 LPM
• Max Pump Output: 110 PSI
• Max Inlet Pressure: 60 PSI
• Voltage: 24 VDC
• Input: 120V AC 60Hz 38W
• Output: 24V DC 1200mA
• Model: Sp57-241200