Maximus II System COMBO

The Best in Reverse Osmosis Water Filtration with all Replacement Filters included for at least three years. This COMBO System includes all filters needed to produce 7000+ Gallons. AMAZING VALUE!

The Maximus II System Combo offers 6 stages of Reverse Osmosis Water Purification. The System will Remove 98-100% of all harmful dissolved solids from your tap water such as Heavy Metals, Pesticides, Chlorine, Fluoride, Pharmaceuticals, industrial pollutants, viruses, Bacteria, Radioactive Particles and all other harmful pollutants commonly found in tap water.

Give yourself the ability to produce the purest of water possible in an alkaline state for the health and enjoyment of you and your loved. Production capacity is 100 GPD (Gallons Per Day) which means that you will always have an abundant supply of ultra purified water even when lots of water is needed for for gatherings of friends and family.

Fully Automatic system, Set it and forget it!
For your convenience the system is also fully automatic. When you take water from the system it will automatically replenish the amount taken by refilling the storage tank where the system will again shut off until more water is drawn from the system. This means that you will always have an abundance of pure, healthy, Alkaline water on Tap at any time and not have to worry about wasting any water.

With your purchase of the Maximus II System COMBO you will have the peace of mind knowing that you and your loved ones are consuming the purest of drinking water possible in the most environmentally friendly and economical fashion. You will also be at ease knowing you have an abundant supply of replacement filters when the need should arise. In this way you can quickly and easily refresh the pre and post filters giving you another 1000+ Gallons of ultra pure water.

PLEASE NOTE: This Maximus II System COMBO comes with a three year Case of Replacement Pre and Post Filters (6 Changes), a 24oz Bag Of D.I Resin Beads, a P.S.I Meter and the all important Digital TDS Meter.

The Digital TDS Meter allows for water purity spot testing of any water source in just seconds with the push of a button. The higher the TDS reading, the higher the concentration of potentially harmful dissolved solids. With a TDS Meter you can accurately measure the quality of the water being produced at any time and also measure the quality of any other water source!

You may add any other product from the Parts and Accessories page and It will ship with your order.

Maximus II System

•    First stage:(SED; 5 Micron Sedimentary Filter)
•    Second Stage:(GAC; 5 Micron Granular Activated Carbon for Chemicals)
•    Third Stage:(CCB; 1 Micron Coconut Carbon Block For Chemicals)
•    Fourth Stage:(100 GPD Reverse Osmosis Membrane)
•    Fifth Stage: (Alkalizing, De-Ionization Resin bead Filtration)
•    Sixth Stage:(PC; Post Carbon polishing filters for taste and odor)

Accessories

•    Case of 21 Pre and Post Filter, Six Changes! (3+ Year Supply)
•    24oz Bag of Replacement Alkalizing DI Resin Bead Filtration Media.
•    Digital TDS Meter (Total Dissolved Solids) in PPM (Parts Per Million)
•    PSI Meter. To Monitor Water Pressure if ever needed.

•    3.2 Gallon, Water Holding Tank (100 PSI) - NSF & CE Certified
•    Long Reach Polished Chrome Goose Neck Faucet.
•    Variable Flow Restrictor - gives 100% control
•    Auto Shut-Off Valve
•    Wall Mounting Metal Bracket
•    Source Water Needle Piercing Saddle Clamp
•    Discharge Drain Water Saddle Clamp
•    10 Feet of Blue 1/4" Tubing
•    Large & Small Canister Wrenches
•    4 x Canister Mounting Clips
•    All Elbows and Fittings for complete Installation Purposes

The Maximus II COMBO System comes with everything you will need to fully install your system and produce 7000+ Gallons of ultra pure drinking water.

Filter Specifications

STAGE 1:  (SED; 5 Micron Sedimentary Filter)
Sediment Removal / PP– Commercial grade sediment filter. Sediment filtration extracts suspended sediment, dirt, rust, silt and sand ranging from filtration of 20 microns down to 5 microns. Reduces particles 8 times smaller than what the naked eye can see.

STAGE 2:  (GAC; 5 Micron Granular Activated Carbon for Chemicals)
Granulated Activated Carbon /UDF – High efficiency pre-filter reduces and removes: chlorine, volatile organic compounds (V.O.C), pesticides, nitrates, herbicides, tastes, odor, and disinfection by products (Chloramines, THM, TCE). Cartridges are constructed totally of FDA grade materials and media.

STAGE 3:  (CCB; 1 Micron Coconut Carbon Block for Chemicals)
Carbon Block Filter / CTO – High efficiency pre-filter removes Chlorine, then reduces or entirely removes Pesticides, Nitrates, Herbicides, tastes, odor, and disinfection by-products (chloramines, THM, TCE), Volatile Organic Compounds (V.O.C).

STAGE 4:  (100 GPD Reverse Osmosis Membrane)
Reverse Osmosis Membrane- This semi permeable membrane filters and rejects tiny impurities down to 1/10,000th of a micron removing at least 95% of all impurities such as colloid, heavy metal, dissolved solids, germs and other harmful substances. Virtually only water molecules and dissolved oxygen can pass through the Reverse Osmosis Membrane.  The rejected contaminants are flushed to drain. The product water is the extremely pure, crisp healthy drinking water.

STAGE 5:  (Alkalizing; De-Ionization Resin Bead Filtration)
The De-Ionization stage will catch any possible contaminants that have have potentially passed through the Reverse Osmosis Membrane to ensure 100% Pure Alkaline water for you and your loved ones. This stage will also boost the PH of the water produced through an ion exchange process to a PH between 7.5 & 8.6 which gives added health benefits.

STAGE 6:  (PC; Post Carbon Final polishing filter for taste and odor)
Post Activated Carbon Filter / T33- This carbon filter does an excellent job of “polishing” any dissolved solids that although unlikely, may have slipped through the 95% removal rate of the Reverse Osmosis Membrane and also through the DI Resin Bead Stage to give added assurance that you are getting the highest quality drinking water possible. The Final Polishing Filter also adds the mineral charcoal back into your water which helps to give the water a full bodied taste and also helps your body to detoxify.

This is a typical setup example.

Please note: The system can be hooked up anywhere in your home. You will simply need to purchase more tubing as needed from the parts and accessories page if you are not planning to have the system installed under your Kitchen Sink.

Example Setup Displayed Under a typical Kitchen Sink.

 

System Dimensions; will the system fit under my sink?

Yes. Every R.O System has been designed to fit under the average homes kitchen sink.

Home II System; Dimensions: 15"L x 5.2"W x 16"H

3.2 Gallon Stainless Steel water Storage Tank;Dimensions: 11"L x 11"W x 13"H. The Tank can also lay on its side to conserve space.

Minimum Operating Pressure: 50 PSI.
The standard water pressure for city and municipal water is 60psi, so if your water comes from city of municipal water supply then you have more then enough pressure. If, however you are on a well system and you have lower than 50psi then you may need a booster pump with your system. The booster pump can be seen at the bottom of this page and also on the parts and accessories page.

Can I install The System Myself?

Yes! All Aquasafe Reverse Osmosis Systems have been specifically designed as DIY (Do It Yourself) systems and are extremely easy to install.
The detailed step by step instructions with example photos are easy to understand and straight forward.
All of the fittings either screw into place or literally push into place. All of the tubing is color codded. You do not need any specialized set of skills to install an Aquasafe R.O. System. Installation takes between 45mins and 1hr.

However, if you are physically disabled or are intimidated this kind of task any local handy man or plumber could install the system for you for a small fee.