The most extensive water filtration method known to man. Produce 100GPD of Pure Alkaline Water at an overall cost of $0.01 Per/Liter!.
The
Maximus II System offers 6 separate stages of high quality water filtration resulting in 98-100% removal of your unfiltered tap water contaminants including Lead, Chlorine, Fluoride, VOC's, Bacteria, Viruses, Pesticides, Pharmaceuticals, Heavy Metals, Industrial Pollutants, Radioactive Particles and a vast list of other harmful contaminants now commonly found in tap water.
produces Alkaline water with a PH range between 7.6 and 8.5
designed to easily fit under your kitchen sink
fully automatic
Quick Connect Fittings Throughout
overall production cost of just $0.01 per liter!
superior quality to that of bottled water
saves you time and money
allows you to do your part to help the environment by not using bottled water.
Set it and forget it! For your convenience the Maximus II System is fully automatic! When you draw water from the Aquasafe Faucet, the system will auto fill its holding tank and then shut off until more water is drawn from the system where the cycle would then repeat. This means that you will always have the convenience and abundance of Pure, Healthy, Alkaline water on Tap at any given time.
With your very own Maximus II System you can rest assured knowing you and your loved ones are consuming the healthiest of drinking water possible in the most economical and environmentally friendly manner. Take action and get protected today!
Click the tabs at the top for all other information pertaining to this system.
The
Maximus II System comes with everything you will need to fully install your system and produce 1000+ Gallons of ultra pure drinking water before ever needing to change the pre and post filters of your system.
Filter Stages Included:
First stage:(SED; 5 Micron Sedimentary Filter)
Second Stage:(GAC; 5 Micron Granular Activated Carbon for Chemicals)
Third Stage:(CCB; 1 Micron Coconut Carbon Block For Chemicals)
Fourth Stage:(100 GPD Reverse Osmosis Membrane)
Fifth Stage: (Alkalizing, De-Ionization Resin bead Filtration)
Sixth Stage:(PC; Post Carbon polishing filters for taste and odor)
Accessories Included:
4.4 Gallon Stainless Steel Holding Tank (100 PSI) - NSF & CE Certified
Long Reach Polished Chrome Goose Neck Faucet
Exclusive E-Z Flush Flow Restrictor - gives 100% control of discharge water
Auto Shut-Off Valve
Wall Mounting Metal Bracket
Source Water Needle Piercing Saddle Clamp
Discharge Drain Water Saddle Clamp
12 Feet of Blue 1/4" Tubing
Large & Small Canister Wrenches (For filter change Purposes)
4 x Canister Mounting Clips
All Elbows and Fittings for complete Installation Purposes
Filter Specifications
To review the specifications of the 6 separate filtration stages that make up the Maximus II Systems, please scroll down past the table below that depicts the rejection percentages of the most common contaminants found in tap water.
The following is an incomplete table of the harmful particulates that will be removed from your water source using this system. The system is effective at removing virtually all other harmful contaminants that may not be listed below.
REVERSE OSMOSIS WATER CONTAMINANT REJECTION TABLE
| Contaminant |
% removed |
|
Contaminant |
% removed |
| Guardia cysts |
100% |
|
Chloride |
99.90% |
| Cryptosporidium cycts |
100% |
Radioactivity |
95-99% |
| DDT |
>99.9% |
Potassium |
92-99% |
| PCB |
>99.9% |
Zinc |
95-99% |
| E. coli bacteria |
>99.9% |
Bicarbonate |
99% |
| Fecal bacteria |
>99.9% |
Sulfate |
95-99% |
| Lindane |
>99.9% |
Calcium |
95-99% |
| Salmonella typhi |
>99.9% |
Strontium |
95-99% |
| Vibrio choleriae |
>99.9% |
Nitrate +3 |
90-99% |
| Shigella disinteriae |
>99.9% |
Ferro cyanide |
96-99% |
| Serratia marcescenes |
>99.9% |
Magnesium |
95-99% |
| Toluane |
>99.9% |
Cadmium |
95-99% |
| Sodium fluoride |
99% |
Fluoride |
90-95% |
| Calcium chloride |
99% |
Arsenic +3 |
95-99% |
| Sodium chloride (NaCl) |
99% |
Iron |
95-99% |
| Sucrose |
99% |
Silver |
95-99% |
| Magnesium chloride |
99% |
Silicate |
95-99% |
| Nickel sulfate NiSO4 |
>99% |
Arsenic +5 |
95-99% |
| Copper sulfate CuSO4 |
>99% |
Aluminum |
95-99% |
| Lactic acid pH5 |
99% |
Mercury |
95-99% |
| Glucose |
98% |
Phosphate |
95-99% |
| Sodium nitrate NaNO3 |
97-99% |
Lead |
95-99% |
| Chlorinated pesticides |
99.90% |
Ammonium |
95-99% |
| Silica SiO2 |
98% |
Barium |
95-99% |
| Sodium |
95-99% |
Chromate |
95-99% |
| Nickel |
95-99% |
Copper |
95-99% |
PLEASE NOTE: The above removal rates are calculated after the reverse osmosis membrane alone. After the reverse osmosis membrane this system's water passes through its DI Resin Canister which will alkalize the water to a PH between 7.6 and 8.7 and also remove any contaminants that have "potentially" passed through the Reverse Osmosis Membrane and its pre-filters. After the DI Stage the water then will pass through the final polishing filter stage leaving you with 97-99% purity for an overall cost of less than $0.01 Per Liter.
Maximus II System Filter Specification
STAGE 1: (SED; 5 Micron Sedimentary Filter)
Sediment Removal / PP Commercial grade sediment filter. Sediment filtration extracts suspended sediment, dirt, rust, silt and sand ranging from filtration of 20 microns down to 5 microns. Reduces particles 8 times smaller than what the naked eye can see.
STAGE 2: (GAC; 5 Micron Granular Activated Carbon for Chemicals)
Granulated Activated Carbon /UDF High efficiency pre-filter reduces and removes: chlorine, volatile organic compounds (V.O.C), pesticides, nitrates, herbicides, tastes, odor, and disinfection by products (Chloramines, THM, TCE). Cartridges are constructed totally of FDA grade materials and media.
STAGE 3: (CCB; 1 Micron Coconut Carbon Block for Chemicals)
Carbon Block Filter / CTO High efficiency pre-filter removes Chlorine, then reduces or entirely removes Pesticides, Nitrates, Herbicides, tastes, odor, and disinfection by-products (chloramines, THM, TCE), Volatile Organic Compounds (V.O.C).
STAGE 4: (100 GPD Reverse Osmosis Membrane)
Reverse Osmosis Membrane- This semi permeable membrane filters and rejects tiny impurities down to 1/10,000th of a micron removing at least 95% of all impurities such as colloid, heavy metal, dissolved solids, germs and other harmful substances. Virtually only water molecules and dissolved oxygen can pass through the Reverse Osmosis Membrane. The rejected contaminants are flushed to drain. The product water is the extremely pure, crisp healthy drinking water.
STAGE 5: (Alkalizing; De-Ionization Resin Bead Filtration)
The De-Ionization stage will catch any possible contaminants that have have potentially passed through the Reverse Osmosis Membrane to ensure 100% Pure Alkaline water for you and your loved ones. This stage will also boost the PH of the water produced through an ion exchange process to a PH between 7.5 & 8.6 which gives added health benefits.
STAGE 6: (PC; Post Carbon Final polishing filter for taste and odor)
Post Activated Carbon Filter / T33- This carbon filter does an excellent job of polishing any dissolved solids that although unlikely, may have slipped through the 95% removal rate of the Reverse Osmosis Membrane and also through the DI Resin Bead Stage to give added assurance that you are getting the highest quality drinking water possible. The Final Polishing Filter also adds the mineral charcoal back into your water which helps to give the water a full bodied taste and also helps your body to detoxify.
This is a typical setup example. Please note: The system can be hooked up anywhere in your home. You will simply need to purchase more tubing as needed from the parts and accessories page if you are not planning to have the system installed under your Kitchen Sink.
Example Setup Displayed Under a typical Kitchen Sink.
System Dimensions; will the system fit under my sink?
Yes. Every R.O System has been designed to fit under the average homes kitchen sink.
Home II System; Dimensions: 15"L x 5.2"W x 16"H
3.2 Gallon Stainless Steel water Storage Tank;Dimensions: 11"L x 11"W x 13"H. The Tank can also lay on its side to conserve space.
Minimum Operating Pressure: 50 PSI. The standard water pressure for city and municipal water is 60psi, therefore if your water comes from your local municipality or city then you will have the proper water pressure needed.
However, if you are on a well water system you may have low water pressure. If the water pressure within your home is less than 50psi we recommend a purchase of a booster pump to go along with your system. The Booster Pump Can be seen at the bottom of this page and can also be found on the parts and accessories page.
Can I install The System Myself?
Yes! All Aquasafe Reverse Osmosis Systems have been specifically designed as DIY (Do It Yourself) systems and are extremely easy to install.
The detailed step by step instructions with example photos are easy to understand and straight forward.
All of the fittings either screw into place or literally push into place. All of the tubing is color codded. You do not need any specialized set of skills to install an Aquasafe R.O. System. Installation takes between 45mins and 1hr.
However, if you are physically disabled or are intimidated this kind of task any local handy man or plumber could install the system for you for a small fee.
