Home II System COMBO

This is a truly Amazing Value. The Home II System comes with 6 complete changes of pre and post filters. This Combo system also comes with a TDS Meter and a PSI Meter and to top it all off the system comes pre loaded will all filters needed for operation so that all of these extra's truly are extra's!

The Home II System Combo employs 5 stages of Reverse Osmosis Water Filtration. Remove 95-100% of all harmful industrial pollutants and dissolved solids from your tap water such as Fluoride, Pharmaceuticals, Heavy Metals, Pesticides, Chlorine, viruses, Bacteria, Radioactive Particles and all other harmful pollutants commonly found in tap water.

With this Reverse Osmosis Water Filtration System you will have the ability to purify your tap water from home to produce extremely pure drinking water for the health and enjoyment of you and your loved ones. Capacity for production is 100 GPD (Gallons Per Day) which means that you will never run out of purified water needed while cooking big means or when having gatherings for friends and family.

Fully Automatic System!
All Reverse Osmosis water filtration Systems from Aquasafe are fully automatic. Set it and forget it! Water taken from the systems holding tank will be automatically replenished until the tank is full. When the tank is full the system will stop producing water until you take more water from the system. This means that you will always have an abundance of pure, healthy, Alkaline water on Tap at any time and also not have to worry about wasting any water.

With a purchase of the Home II System COMBO you will have the peace of mind knowing that you and your loved ones are consuming pure of drinking water in the most environmentally friendly and economical fashion. You will also be at ease knowing you have an abundant supply of replacement filters when the need should arise. In this way you can quickly and easily refresh the pre and post filters giving you another 1000+ Gallons of ultra purified water.

PLEASE NOTE: This Home II System COMBO comes with a three year Case of Replacement Pre and Post Filters (6 Changes), a P.S.I Meter and the all important Digital TDS Meter.

The Digital TDS Meter allows for water purity spot testing of any water source in just seconds with the push of a button. The higher the TDS reading, the higher the concentration of potentially harmful dissolved solids. With a TDS Meter you can accurately measure the quality of the water being produced at any time and also measure the quality of any other water source!

You may add any other product from the Parts and Accessories page and It will ship with your order.

Home II System COMBO

•    First stage:(SED; 5 Micron Sedimentary Filter)
•    Second Stage:(GAC; 5 Micron Granular Activated Carbon for Chemicals)
•    Third Stage:(CCB; 1 Micron Coconut Carbon Block For Chemicals)
•    Fourth Stage:(100 GPD Reverse Osmosis Membrane)
•    Fifth Stage:(PC; Post Carbon polishing filters for taste and odor)

Accessories

•    Case of 21 Pre and Post Filter, Six Changes! (3+ Year Supply)
•    Digital TDS Meter (Total Dissolved Solids) in PPM (Parts Per Million)
•    PSI Meter. To Monitor Water Pressure if ever needed.

•    3.2 Gallon, Water Holding Tank (100 PSI) - NSF & CE Certified
•    Long Reach Polished Chrome Goose Neck Faucet.
•    Variable Flow Restrictor - gives 100% control
•    Auto Shut-Off Valve
•    Wall Mounting Metal Bracket
•    Source Water Needle Piercing Saddle Clamp
•    Discharge Drain Water Saddle Clamp
•    10 Feet of Blue 1/4" Tubing
•    Large & Small Canister Wrenches
•    2 x Canister Mounting Clips
•    All Elbows and Fittings for complete Installation Purposes

The Home II COMBO System comes with everything you will need to fully install your system and produce 7000+ Gallons of ultra pure drinking water.

Filter Specifications

STAGE 1:  (SED; 5 Micron Sedimentary Filter)
Sediment Removal / PP– Commercial grade sediment filter. Sediment filtration extracts suspended sediment, dirt, rust, silt and sand ranging from filtration of 20 microns down to 5 microns. Reduces particles 8 times smaller than what the naked eye can see.

STAGE 2:  (GAC; 5 Micron Granular Activated Carbon for Chemicals)
Granulated Activated Carbon /UDF – High efficiency pre-filter reduces and removes: chlorine, volatile organic compounds (V.O.C), pesticides, nitrates, herbicides, tastes, odor, and disinfection by products (Chloramines, THM, TCE). Cartridges are constructed totally of FDA grade materials and media.

STAGE 3:  (CCB; 1 Micron Coconut Carbon Block for Chemicals)
Carbon Block Filter / CTO – High efficiency pre-filter removes Chlorine, then reduces or entirely removes Pesticides, Nitrates, Herbicides, tastes, odor, and disinfection by-products (chloramines, THM, TCE), Volatile Organic Compounds (V.O.C).

STAGE 4:  (100 GPD Reverse Osmosis Membrane)
Reverse Osmosis Membrane- This semi permeable membrane filters and rejects tiny impurities down to 1/10,000th of a micron removing at least 95% of all impurities such as colloid, heavy metal, dissolved solids, germs and other harmful substances. Virtually only water molecules and dissolved oxygen can pass through the Reverse Osmosis Membrane.  The rejected contaminants are flushed to drain. The product water is the extremely pure, crisp healthy drinking water.

STAGE 5:  (PC; Post Carbon Final polishing filter for taste and odor)
Post Activated Carbon Filter / T33- This carbon filter does an excellent job of “polishing” any dissolved solids that may have passed through the 95% removal rate of the Reverse Osmosis Membrane to give added assurance that you are getting the highest quality drinking water possible. The Final Polishing Filter also adds the mineral charcoal back into your water which helps to give the water a full bodied taste and also helps your body to detoxify.

This is a typical setup example.

Please note: The system can be hooked up anywhere in your home. You will simply need to purchase more tubing as needed from the parts and accessories page if you are not planning to have the system installed under your Kitchen Sink.

Example Setup Displayed Under a typical Kitchen Sink.

 

System Dimensions; will the system fit under my sink?

Yes. Every R.O System has been designed to fit under the average homes kitchen sink.

Home II System COMBO; Dimensions: 15"L x 5.2"W x 16"H

3.2 Gallon Stainless Steel water Storage Tank Dimensions: 11"L x 11"W x 13"H. The Tank can also lay on its side to conserve space.

Minimum Operating Pressure: 50 PSI.
The standard water pressure for city and municipal water is 60psi, so if your water comes from city of municipal water supply then you have more then enough pressure.
If, however you are on a well system and you have lower than 50psi then you may need a booster pump with your system. The booster pump can be seen at the bottom of this page and also on the parts and accessories page.

Can I install The System Myself?

Yes! All Aquasafe Reverse Osmosis Systems have been specifically designed as DIY (Do It Yourself) systems and are extremely easy to install.
The detailed step by step instructions with example photos are easy to understand and straight forward.
All of the fittings either screw into place or literally push into place. All of the tubing is color codded. You do not need any specialized set of skills to install an Aquasafe R.O. System. Installation takes between 45mins and 1hr.

However, if you are physically disabled or are intimidated this kind of task any local handy man or plumber could install the system for you for a small fee.