The Home II System offers 5 stages of Reverse Osmosis water filtration allowing for the easy purification of your homes tap water by removing 95-98% of all source water contamination such as chlorine, fluoride, viruses, bacteria, pesticides, Pharmaceuticals, heavy Metals, Radioactivity and all other harmful dissolved solids.
This water filter system will give you the ability to produce an abundant supply of ultra purified drinking and cooking water. Production capacity is 100GPD (Gallons Per Day) for the health and enjoyment of you and your loved ones. Produce purified water from home that is measurably superior in quality to bottled water at a cost of Just $0.01 Per/Liter !
Fully Automatic System!
Aquasafe's Home II system is fully automatic for your convenience. When you take water from the Aquasafe Faucet, the system will allow water to flow through the system to auto fill the amount of water you have taken from the holding tank. When the holding tank is full, the system will shut off again until you again take more water. This means that you will have an abundance of pure healthy water on tap at all times and also not have to worry about wasting any water!
Get your very own R.O. water filtration system from Aquasafe and rest assured knowing you and your loved ones are consuming the purest and healthiest water possible in the most economical and environmentally friendly way.
PLEASE NOTE: This system comes with all filters and fittings needed for installation and 1000+ Gallons of operation before ever needing to change any filters, but does not include replacement filters, a PSI Gauge or a TDS Meter.
We highly recommend a TDS Meter with a purchase of the Home II System.
Seen top right of this page, the TDS Meter will accurately read the ppm (parts per million) of dissolved solids in the water you are testing with the push of a button. The Higher the ppm Reading, the higher the concentration of potentially harmful contaminants in your water.
With a TDS Meter you can accurately measure the purity of your new systems water!
You may add any other product from the Parts and accessories page and they will ship with your order.
Home II System
First stage:(SED; 5 Micron Sedimentary Filter)
Second Stage:(GAC; 5 Micron Granular Activated Carbon for Chemicals)
Third Stage:(CCB; 1 Micron Coconut Carbon Block For Chemicals)
Fourth Stage:(100 GPD Reverse Osmosis Membrane)
Fifth Stage:(PC; Post Carbon polishing filters for taste and odor)
Accessories
3.2 Gallon, Water Holding Tank (100 PSI) - NSF & CE Certified
Long Reach Polished Chrome Goose Neck Faucet.
Variable Flow Restrictor - gives 100% control
Auto Shut-Off Valve
Wall Mounting Metal Bracket
Source Water Needle Piercing Saddle Clamp
Discharge Drain Water Saddle Clamp
10 Feet of Blue 1/4" Tubing
Large & Small Canister Wrenches
2 x Canister Mounting Clips
All Elbows and Fittings for complete Installation Purposes
The Home II System comes with everything you will need to fully install your system and produce 1000+ Gallons of ultra pure drinking water before ever needing to change the filters of your system.
You may be interested in the Home II System COMBO seen top right of this page. The Home II COMBO Comes with six full changes of pre and post filters(3+ Year Supply), a TDS & PSI Meter for a truly amazing value.
Filter Specifications
STAGE 1: (SED; 5 Micron Sedimentary Filter)
Sediment Removal / PP Commercial grade sediment filter. Sediment filtration extracts suspended sediment, dirt, rust, silt and sand ranging from filtration of 20 microns down to 5 microns. Reduces particles 8 times smaller than what the naked eye can see.
STAGE 2: (GAC; 5 Micron Granular Activated Carbon for Chemicals)
Granulated Activated Carbon /UDF High efficiency pre-filter reduces and removes: chlorine, volatile organic compounds (V.O.C), pesticides, nitrates, herbicides, tastes, odor, and disinfection by products (Chloramines, THM, TCE). Cartridges are constructed totally of FDA grade materials and media.
STAGE 3: (CCB; 1 Micron Coconut Carbon Block for Chemicals)
Carbon Block Filter / CTO High efficiency pre-filter removes Chlorine, then reduces or entirely removes Pesticides, Nitrates, Herbicides, tastes, odor, and disinfection by-products (chloramines, THM, TCE), Volatile Organic Compounds (V.O.C).
STAGE 4: (100 GPD Reverse Osmosis Membrane)
Reverse Osmosis Membrane- This semi permeable membrane filters and rejects tiny impurities down to 1/10,000th of a micron removing at least 95% of all impurities such as colloid, heavy metal, dissolved solids, germs and other harmful substances. Virtually only water molecules and dissolved oxygen can pass through the Reverse Osmosis Membrane. The rejected contaminants are flushed to drain. The product water is the extremely pure, crisp healthy drinking water.
STAGE 5: (PC; Post Carbon Final polishing filter for taste and odor)
Post Activated Carbon Filter / T33- This carbon filter does an excellent job of polishing any dissolved solids that may have slipped through the 95% removal rate of the Reverse Osmosis Membrane to ensure that you are getting the highest quality drinking water. The Final Polishing Filter also adds the mineral charcoal back into your water which helps to give the water a full bodied taste and also helps your body to detoxify.
This is a typical setup example. Please note: The system can be hooked up anywhere in your home. You will simply need to purchase more tubing as needed from the parts and accessories page if you are not planning to have the system installed under your Kitchen Sink.
Example Setup Displayed Under a typical Kitchen Sink.
System Dimensions; will the system fit under my sink?
Yes. Every R.O System has been designed to fit under the average homes kitchen sink.
Home II System; Dimensions: 15"L x 5.2"W x 16"H
3.2 Gallon Stainless Steel water Storage Tank;Dimensions: 11"L x 11"W x 13"H. The Tank can also lay on its side to conserve space.
Minimum Operating Pressure: 50 PSI. The standard water pressure for city and municipal water is 60psi, therefore if your water comes from your local municipality or city then you will have the proper water pressure needed.
However, if you are on a well water system you may have low water pressure. If the water pressure within your home is less than 50psi we recommend a purchase of a booster pump to go along with your system. The Booster Pump Can be seen at the bottom of this page and can also be found on the parts and accessories page.
Can I install The System Myself?
Yes! All Aquasafe Reverse Osmosis Systems have been specifically designed as DIY (Do It Yourself) systems and are extremely easy to install.
The detailed step by step instructions with example photos are easy to understand and straight forward.
All of the fittings either screw into place or literally push into place. All of the tubing is color codded. You do not need any specialized set of skills to install an Aquasafe R.O. System. Installation takes between 45mins and 1hr.
However, if you are physically disabled or are intimidated this kind of task any local handy man or plumber could install the system for you for a small fee.
