Maximus II Combo System Specifications

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


Maximus II System Combo Specifications Page
Please scroll down for complete specification Details.


Back to Drinking Water Filtration Page

Maximus II System Combo

•    First stage:       (SED; 5 Micron Sedimentary Filter)
•    Second Stage:  (GAC; 5 Micron Granular Activated Carbon for Chemicals)
•    Third Stage:     (CCB; 1 Micron Coconut Carbon Block For Chemicals)
•    Fourth Stage:   (100 GPD Reverse Osmosis Membrane)
•    Fifth Stage:      (Demineralization by Ionization DI Resin Bead Filtration)
•    Sixth Stage:     (PC; Post Carbon polishing filters for taste and odor)

     
Accessories

•    3.2 Gallon, 100 PSI, Water Holding Tank
•    Case of 21 Pre and Post Filters ( 6 System Changes) Includes (6) high capacity sedimentary filters (SED); (6) high capacity  granular activated coconut carbon filters(GAC); (6) high capacity coconut carbon block filters (CCB); AND (3) in line Post Carbon polishing filters (PC final filter for taste and odor)
•    24oz Bag of D.I Resin Beads (Demineralization By Ionization)
•    Long Reach Kitchen Faucet.
•    T.D.S Meter (Total Dissolved solids)
•    P.S.I Gauge (Pounds Per Square Inch)
•    1 x 6oz refillable DI Canister filled with DI Resin Beads



Filter Specifications

STAGE 1:  (SED; 5 Micron Sedimentary Filter)
Sediment Removal / PP– Commercial grade sediment filter. Sediment filtration extracts suspended sediment, dirt, rust, silt and sand ranging from filtration of 20 microns down to 5 microns. Reduces particles 8 times smaller than what the naked eye can see.

STAGE 2:  (GAC; 5 Micron Granular Activated Carbon for Chemicals)
Granulated Activated Carbon /UDF - High efficiency pre-filter reduces and removes: chlorine, volatile organic compounds (V.O.C), pesticides, nitrates, herbicides, tastes, odor, and disinfection by products (Chloramines, THM, TCE). Cartridges are constructed totally of FDA grade materials and media. In addition KDF media may be used for the removal of lead and other heavy metals.
 
STAGE 3:  (CCB; 1 Micron Coconut Carbon Block for Chemicals)
Carbon Block Filter / CTO – High efficiency pre-filter removes Chlorine, then reduces or removes Pesticides, Nitrates, Herbicides, tastes, odor, and disinfection by-products (chloramines, THM, TCE), Volatile Organic Compounds (V.O.C).

STAGE 4:  (100 GPD Reverse Osmosis Membrane)
Reverse Osmosis Membrane- This semi permeable membrane filters and rejects tiny impurities, colloid, heavy metal, dissolvable solids, germs and other harmful substances. Virtually only water molecules and dissolved oxygen can pass through the membrane.  The rejected contaminants are flushed to drain. The product water is essentially nothing but high quality, low TDS
water.

STAGE 5:  (Demineralization by Ionization DI Resin Bead Filtration)

Resin Filter / Demineralization by Ionization– Removes hard water minerals through an ion exchange process. Intended to prevent inorganic calcium, magnesium, and soluble iron etc...  Greatly increases quality of filtration.

STAGE6:  (PC; Post Carbon polishing filters for taste and odor)
Post Activated Carbon Filter / T33- This carbon filter treats only R.O. water so it does an excellent job of “polishing” any Volatile Organic Compounds (V.O.C), Pesticides, Nitrates, Herbicides, tastes, odor, and disinfection by-products (chloramines, THM, TCE). That may have slipped through the membrane, plus, adsorbs any odors that may come from the pressure storage tank. Gives water a clean refreshed taste on the way to your tap.





 

 

 

 

 

Copyright © Aquasafe Systems 2009 LTD Vancouver, British Columbia

Edit Website